GBC Foton 30 FULLY AUTOMATIC FEED A4 & A3 Heavy Duty Roll Laminator: 75 - 125 Micron Film, 3-Minute Warm-up, High Speed

GBC Foton 30 Fully Automatic A3 Auto Feed Laminator

The GBC Foton 30 is a fully automatic auto feed laminator designed to save time on repeat A4 and A3 laminating jobs. Instead of loading individual pouches one by one, the Foton 30 automatically feeds, laminates and trims up to 30 A4 or A3 documents at a time at the touch of a button.

This cartridge-based laminator uses GBC Foton 30 laminating film cartridges in 75, 100 and 125 micron film thicknesses. With automatic document feeding, automatic paper alignment, automatic film thickness detection, automatic and manual trimmer modes, a 4-roller system and simple cartridge loading, it is a strong choice for offices, schools and workplaces that regularly laminate batches of documents and want to reduce hands-on laminating time.

Key Features

• Fully automatic A3 auto feed laminator
• Automatically feeds, laminates and trims up to 30 A4 or A3 documents at a time
• Starts processing the document stack automatically when the laminator is ready
• Automatic paper alignment helps produce neat, consistent laminated documents
• Uses GBC Foton 30 laminating film cartridges
• Laminates using 75, 100 and 125 micron film thicknesses
• Automatically detects film thickness
• High quality 4-roller system
• Ready indicator and auto-start once warmed up
• Maximum warm-up time of approximately 4 minutes
• Processes up to 3 A4 documents per minute
• Can laminate A4, A3 and banners up to 297 mm wide
• Intuitive control panel allows easy switching between automatic and manual mode settings
• Simple film loading using Foton 30 cartridges
• Anti-jam film cartridge system
• Includes a 15 m starter cartridge, approximately 60 A4 laminates
• Low film indicator light shows when the cartridge needs replacing
• Manual lamination mode for heavyweight paper or non-standard shaped documents up to 250 gsm
• Automatic and manual trimmer modes
• Auto shut-off when left idle for 15 minutes
• Backed by a 2-year warranty

Best For

The GBC Foton 30 is best suited to batch laminating in offices, schools, reception areas, admin teams and busy workplaces where users regularly need to laminate multiple A4 or A3 documents. It is a good choice for laminating signs, notices, certificates, menus, teaching resources, information sheets, displays, reference materials and repeated document batches with less manual handling than a standard pouch laminator.

What Film Thickness Can It Use?

This machine uses GBC Foton 30 laminating film cartridges in 75, 100 and 125 micron film thicknesses, giving a total laminated thickness of 150, 200 or 250 micron depending on the cartridge used. It does not use standard laminating pouches. For compatible supplies, use GBC Foton 30 laminating film cartridges.

Important Laminating Advice

The GBC Foton 30 is a cartridge-based automatic laminator and is not designed for standard pouch carrier use. For normal automatic operation, load suitable A4 or A3 documents into the feeder and use the correct GBC Foton 30 laminating film cartridge.

For smaller paper sizes, such as flash cards, place the smaller items onto an A4 sheet or similar backing sheet, laminate the full sheet and then cut the items out afterwards. Manual lamination mode can be used for heavyweight paper or non-standard shaped documents up to 250 gsm.

Always use compatible GBC Foton 30 film cartridges. Using the correct cartridge, document size and feed mode helps reduce the risk of jams, poor results or machine damage.

Technical Specifications

Frequently Asked Questions

Is the GBC Foton 30 suitable for office use?

Yes. The GBC Foton 30 is designed for high-volume batch laminating in offices, schools and busy workplace environments, with a maximum daily volume of 25+ items per day. It is especially useful where staff need to laminate multiple A4 or A3 documents without manually feeding each item one at a time. For very heavy print room or professional laminating, a professional laminator or larger roll laminator may be more suitable.

Can this laminator laminate A3 documents?

Yes. The GBC Foton 30 can laminate A3 documents, A4 documents and banners up to 297 mm wide.

Does it use standard laminating pouches?

No. The GBC Foton 30 uses dedicated GBC Foton 30 laminating film cartridges, not standard laminating pouches.

What film thickness does it accept?

The GBC Foton 30 accepts 75, 100 and 125 micron film cartridges, giving total laminated thicknesses of 150, 200 and 250 micron.

Can it laminate smaller items such as flash cards?

Yes, but smaller paper sizes should be placed onto an A4 sheet or similar backing sheet, then laminated and cut out afterwards. The minimum paper size is W125 x L153 mm.

Does it need a pouch carrier?

No. The GBC Foton 30 is a cartridge-based automatic laminator and does not use standard laminating pouches or pouch carriers. For small items, place them onto an A4 sheet or similar backing sheet before laminating.

How many sheets can it laminate automatically?

The GBC Foton 30 can automatically feed, laminate and trim up to 30 A4 or A3 documents at a time.

How long does it take to warm up?

The maximum warm-up time is approximately 4 minutes, with the product specifications listing an approximate warm-up time of 3 minutes.